- Deep Groove Ball Bearings[6]
- Printing Machinery Parts[6]
- Washing Machine Parts[1]
- Other Bearings[6]
- Auto Clutch[6]
- Other Roller Bearings[4]
- Cylindrical Roller Bearings[1]
- Bicycle Freewheel[2]
- Other Home Appliance Parts[1]
- Electric Bicycle Motor[2]
- Auto Bearing[6]
- Material Handling Equipment Parts[2]
- Textile Stock[1]
- Textile Machinery Parts[2]
- Other Power Transmission Parts[6]
- Farm Machinery Parts[1]
- Harvesters[1]
- Other Printing Materials[1]
- ATV Parts[1]
- Other Motorcycle Parts[6]
- Auto Starter[3]
- Motorcycle Starter[1]
- Other Mechanical Parts[2]
- Cages[6]
- Packaging Machinery Parts[2]
- Special Bearings[1]
- Other Auto Parts[2]
- Road Roller[3]
- Motorcycle Transmissions[1]
- Contact Person : Mr. wang winking
- Company Name : Changzhou Dinghao Precision Machine Co., Ltd.
- Tel : 86-519-86578911,88237731
- Fax : 86-519-86578221
- Address : Jiangsu,changzhou,The Jinjia lndustrial Zone Yancheng Road,Hutang Town-Changzhou City,Jiangsu Province
- Country/Region : China
- Zip : 213161
one way bearing
Related Product Searches:one way bearing,High Quality,one way bearing, one way clutch bearing,B203 to B214
1. One way bearing B Series shaft mounted,so the shaft on which the clutch is mounted must be hardened to HRC56-60 and 1.5mm case depth after grinding. Grind to 0.4S16micro-inchfinish.The taper of this shaft should not exceed0.01mm per 50mm.
2. For installation of the clutch,mount the clutch with bearings at both sides or on one side in order to obtain comcentricity between the shaft and the clutch outer race and to take up radial or thrust loads which may work on the outer race or the shaft. See the installation example.
3. The clutch should be mounted on the shaft by rotating it in the direction marked by the arrow shown on the clutch plate, DO not apply shock to the clutch by hammering.
4. The clutches have the same outside diameters as the bearings shown in the table above. Bore tolerance of the housing in which the clutch is assembled should be within the range shown in the table below.
5 .For indesing, oil lubrication in recommended.
6. Concentricity of the housing bore and shaft should be within 0.05mm.
7. Platekey.
one way bearing
